GO GREEN! LOWER CARBON! 

Liniotech 5kw Solar Inverter 48V with 80A MPPT Controller, Pure Sine Wave Power Inverter 5000W, Max. PV Input 5500W, 500V, 22A, Work with Lead Acid and Lithium Batteries!

• 5000W Solar Inverter 48V to 110V/120V AC, built-in 80A MPPT charge controller, is a new all-in-one solar inverter charger. The solar charge module adopts the latest optimized MPPT tracking technology, with an efficiency of up to 99.9%. Max.PV Input Power: 5500W, 500V, 22A, and Max.Power output: 5000W, max charge current: 80A. AC input Voltage range: 90-140V, Output 100/105/110Vac ±5%.
• 5000W Off-Grid Power Inverter Charger Support Utility / Generator / Solar Charge. It has Four charging modes optional, i.e. PV priority, Utility Priority, Hybrid Charging, and Only Solar Charging; and Two output modes: mains bypass and inverter output; uninterrupted power supply, to meet different application requirements.
• 48V Pure sine Wave Solar Inverter fit for 48V Lead-Acid (seal, AGM, Gel, Flooded) and Lithium battery. With the function of activating the lithium battery with solar energy and AC mains power, it supports the connection of the lead-acid battery and lithium battery.
• DC-AC Inverter module based on full digital intelligent design adopts advanced SPWM technology, outputs pure sine wave, and converts DC into AC. It is suitable for AC loads such as household appliances, electric tools, industrial devices, electronic audiovisuals, etc. Possessing multiple protection functions and 360° comprehensive protection.
• The Pure sine Wave Inverter 5000W adopts the segment LCD display design to display the operation data and state of the system in real-time. The comprehensive electronic protection function ensures the safety and stability of the whole system. Intelligent variable speed fan to efficiently dissipate heat and extend system life.

• Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
• Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
• Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging, and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
• Advanced MPPT technology with an efficiency of 99.9%. Built in 80amp MPPT controller
• Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
• Power saving mode available to reduce no-load loss.
• Intelligent variable speed fan to efficiently dissipate heat and extend system life.
• ON/OFF rocker switch for AC output control.
• Complete protections, including short circuit protection, over-voltage and under-voltage protection, overload protection, reverse protection, etc.
• It has the function of mixed load: when the battery is not connected, photovoltaic and commercial power can supply power to the load at the same time (if there is no battery, the commercial power must be connected). When the battery is full, it can also enter the mixed load mode, which can make full use of the photovoltaic energy